Stanley Estimator 39 030 Manual

How to Use the Stanley Estimator 39-030: A Handy Guide

The Stanley Estimator 39-030 is a compact and easy-to-use device that can measure distances, areas and volumes with just a few clicks. It can also convert units and store up to 10 measurements in its memory. Whether you need to estimate the size of a room, a wall, a floor, a window, a door or any other object, the Stanley Estimator 39-030 can help you get accurate results in seconds.

However, since this product was discontinued in 1989[^1^], you may not have access to its original owner's manual. That's why we have created this handy guide to show you how to use the Stanley Estimator 39-030 effectively and safely. Here are the steps you need to follow:

Turn on the device by pressing the ON/OFF button. The display will show \"0.00\" and the unit indicator will show \"m\" for meters.

Select the desired unit of measurement by pressing the UNIT button. You can choose between meters (m), feet (ft), inches (in), square meters (m2), square feet (ft2), cubic meters (m3) or cubic feet (ft3).

Point the device at the object you want to measure and press the MEASURE button. The display will show the distance from the device to the object.

If you want to measure an area, press the AREA button. The display will show \"L\" for length and prompt you to measure the length of the object. Press the MEASURE button again and then move the device to measure the width of the object. Press the MEASURE button once more and the display will show \"A\" for area and the calculated area of the object.

If you want to measure a volume, press the VOLUME button. The display will show \"L\" for length and prompt you to measure the length of the object. Press the MEASURE button again and then move the device to measure the width of the object. Press the MEASURE button once more and then move the device to measure the height of the object. Press the MEASURE button for the last time and the display will show \"V\" for volume and the calculated volume of the object.

If you want to store a measurement in memory, press the MEMORY button after taking a measurement. The display will show \"M\" for memory and a number from 1 to 10 indicating which memory slot is used. You can store up to 10 measurements in memory.

If you want to recall a measurement from memory, press the RECALL button and use the UP or DOWN buttons to scroll through the stored measurements. The display will show \"M\" for memory and a number from 1 to 10 indicating which memory slot is selected.

If you want to clear a measurement from memory, press the CLEAR button while selecting a memory slot with the RECALL button. The display will show \"C\" for clear and then return to \"0.00\".

If you want to clear all measurements from memory, press and hold the CLEAR button for 3 seconds. The display will show \"CL\" for clear all and then return to \"0.00\".

Turn off the device by pressing the ON/OFF button or wait for it to turn off automatically after 5 minutes of inactivity.

We hope this guide has helped you learn how to use your Stanley Estimator 39-030 effectively and safely. If you have any questions or need further assistance, please contact us at support@stanleytools.com or visit our website at https://www.stanleytools.com/support. 061ffe29dd