How to Use BMW INPA 3.01 DIS SSS And DIAG HEAD With Instuctions
If you are looking for a comprehensive diagnostic tool for your BMW car, you may want to consider the BMW INPA 3.01 DIS SSS And DIAG HEAD software package. This software bundle allows you to access various functions and features of your BMW car, such as reading and clearing fault codes, coding and programming modules, testing sensors and actuators, and more.
However, installing and using this software package can be tricky, especially if you are not familiar with the technical aspects of BMW cars. That's why we have prepared this guide to help you set up and use the BMW INPA 3.01 DIS SSS And DIAG HEAD software package with ease.
What You Need
Before you start, make sure you have the following items:
A laptop or PC with Windows XP or higher operating system.
A BMW INPA K+DCAN USB cable or a BMW ICOM interface.
A BMW car that is compatible with the software package. You can check the compatibility list here: https://www.bimmerforums.com/forum/showthread.php2206757-INPA-EDIABAS-6-4-7-Donwload-Full-Package
The BMW INPA 3.01 DIS SSS And DIAG HEAD software package. You can download it from here: https://mega.nz/#!axIjhQKT!gX74bRKsLmHxwQYdNz3GNE4rL0ZMlZyVOa-v8fEISd8
How to Install
Follow these steps to install the software package on your laptop or PC:
Extract the downloaded file to a folder on your desktop.
Open the folder and run the \"setup.exe\" file.
Follow the on-screen instructions to install the software package. You may need to restart your computer several times during the installation process.
After the installation is complete, open the \"C:\\EDIABAS\\BIN\\EDIABAS.INI\" file with Notepad and change the \"Interface =\" line to match your interface type. For example, if you are using a K+DCAN USB cable, change it to \"Interface = STD:OBD\". If you are using an ICOM interface, change it to \"Interface = REMOTE\". Save and close the file.
Open the \"C:\\EDIABAS\\BIN\\OBD.INI\" file with Notepad and change the \"Port =\" line to match your COM port number. You can check your COM port number in Device Manager under Ports (COM & LPT). For example, if your COM port number is 5, change it to \"Port = COM5\". Save and close the file.
Copy the \"C:\\EDIABAS\\ECU\\*.prg\" files to \"C:\\NCSEXPER\\DATEN\\\" folder.
Copy the \"C:\\EDIABAS\\ECU\\*.grp\" files to \"C:\\NCSEXPER\\SGDAT\\\" folder.
Copy the entire \"C:\\INPA\" folder to \"C:\\\\\" drive.
How to Use
Follow these steps to use the software package on your BMW car:
Connect your interface (K+DCAN USB cable or ICOM) to your laptop or PC and to your BMW car's OBD port.
Turn on the ignition of your BMW car but do not start the engine.
Open the \"C:\\INPA\\BIN\\INPALOAD.EXE\" file and select your car model from the menu.
Wait for the software to initialize and connect to your car. You should see a black dot in the lower left corner of the screen indicating that the connection is successful.
Select the desired function from the menu bar or from the icons on the screen. For example, if you want to read fault codes, select \"F4: Error Memory\" and then select \"F1: Read Errors\".
Follow the instructions on the screen to perform the selected function. You can also use 061ffe29dd